transducer mount Hummingbird Piranha 4

[ Follow Ups ] [ Post Followup ] [ NMS WWWBoard Version 1.0 ] [ FAQ ]

Posted by Yakoh on 19:42:13 07/20/03

I have a a Piranha 4 and I want mount the transducer inside the hull. Problem is, this model has a surface temperature thermometer mounted on the bottom of the transducer: it's just a small, rivet like metal pin that protrudes about 1/16" from the bottom. Think I can get a good mount with this if I use a sufficient amount of goop? Thanks...

Follow Ups:

Re: transducer mount Hummingbird Piranha 4 tecate dave 23:46:26 07/21/03 (1)
- Check out Nbond.com, best epoxy I have found yet! Rhino 11:53:12 07/22/03 (0)
Re: transducer mount Hummingbird Piranha 4 tecate dave 23:43:37 07/21/03 (0)
Re: YES.. transducer mount Hummingbird Piranha 4 Grego 22:48:03 07/20/03 (0)

Post a Followup

[ Follow Ups ] [ Post Followup ] [ NMS WWWBoard Version 1.0 ] [ FAQ ]

Name:
E-Mail:
Subject:
Comments:	: I have a a Piranha 4 and I want mount the transducer inside the hull. Problem is, this model has a surface temperature thermometer mounted on the bottom of the transducer: it's just a small, rivet like metal pin that protrudes about 1/16" from the bottom. Think I can get a good mount with this if I use a sufficient amount of goop? Thanks...
Optional Link URL:
Link Title:
Optional Image URL: