[ Follow Ups ] [ Post Followup ] [ NMS WWWBoard Version 1.0 ] [ FAQ ]
Posted by Rhino on 11:35:46 09/19/03
In Reply to: Re: Fish Finder Transducer.... posted by Cucamonga Keith
: : I use is at www.nbond.com , specifically made to work on plastic to plastic applications and is the longest lasting stuff I have found. I little bit more $, but worth it. Slow cure stuff is best. So far, no failures, except whe I used other products. TL Rhino Rhino,Sounds like a good thing so I checked out www.nbond.com and according to the excerpt below, it says NBond is permanent.... very permanent!!. When using this stuff, can you get the puck back off again in case it needs to be replaced, etc., or does it become part of the hull forever?Keith
Hello Keith, Lets just say it is permanent, until you pry it off with a screw driver. I just removed a puck to install it on my Prowler and the puck came off with a slight skin of the old yak. Cleaned up the puck and redid it on the new yak.Will have to test it tournament day Sunday, Sunday, Sunday, see you there! Rhino
[ Follow Ups ] [ Post Followup ] [ NMS WWWBoard Version 1.0 ] [ FAQ ]