Do you have the cobra highback seat?


[ Follow Ups ] [ Post Followup ] [ WWWBoard Version 2.0 Test ] [ FAQ ]

Posted by DMAC on September 24, 2002 at 22:32:49:

In Reply to: cobra navigator fishermen... suggestions please posted by pEsCaDoR5312 on September 24, 2002 at 11:34:01:

If so here's what I did. I noticed that the webbing on the back of the seat was only stitched on the horizontal straps, not the vertical ones. The vertical ones are just glued on so I pried them free and using cable ties I attached a plastic rod holder to each one of them. I normally use these for my spare sticks and billy but you could troll with one of them. I wouldn't try both at the same time as they are too close together and you'd probaby just end up with both lines pin wheeling around each other. Go to the link below and check out the top pic.

TL



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ WWWBoard Version 2.0 Test ] [ FAQ ]